Custom Logo Clipper Bottles - 1.2L
1.2 litre insulated water bottles with your logo, for hydration all shift without a refill
Minimum 25. The price per bottle comes down with quantity and with a longer delivery window. Your logo, delivery, customs duties (if applicable) and verified ocean plastic removal are included, with no setup fees and nothing added later.
One price per unit that includes your logo, delivery to one address and customs duties where applicable. Free mock-up within a day, and nothing to pay until you have approved it.
Trusted by teams at
All-in delivered pricing
- No setup fees
- No logo or print charges
- No delivery added later
- No surprise customs charges
- Ocean plastic removal included, verified by Plastic Bank
All-in delivered pricing
To United Kingdom in GBP. Includes your logo, delivery, customs duties (if applicable) and verified ocean plastic removal. Change country
| Price break | Per bottle | Order total | Ocean plastic bottles removed | |
|---|---|---|---|---|
| Retail price | £35.00save 00% | |||
| ✓25+ bottles minimum | £35.00save 0% | £875.00 | 125 | |
| 50+ bottles | £26.30save 25% | £1,315.00 | 250 | |
| 100+ bottles | £24.50save 30% | £2,450.00 | 500 | |
| 300+ bottles | £22.80save 35% | £6,840.00 | 1500 | |
| 500 bottles | £21.00save 40% | £10,500.00 | 2500 | |
| multiples of 25 | Per bottle | Order total | ||
| Over 500 bottles | Volume pricing | Quoted individually | 2500+ |
UK orders: VAT is added to the quote.
Branding
Four ways to put your logo on it
Laser engraving
Your logo cut into the finish for a minimal look.
Included in the price
Single ColourLift™ Print
A raised print with a tactile feel, in one colour.
Included in the price
Multi ColourLift™ Print
The same raised print in two or more colours.
Small surcharge, shown in the price table
360° wrap
One seamless print right around the body.
Small surcharge, shown in the price table
Larger runs: embossed or debossed logo from 3000 units, metallic chrome plating from 1000, custom Pantone bottle and lid from 1000. All quoted individually.
Why this one
Lid
Carabiner clip lid
A built-in carabiner clips the bottle to a rucksack, bike or kit bag. Under the clip is a wide mouth for ice and cleaning, with a drinking cap on top.
Insulation
Cold for 24 hours, hot for 12
Double-wall vacuum insulated stainless steel keeps cold drinks cold for up to 24 hours and hot drinks hot for up to 12, with no condensation on the outside.
Make it yours
Mix and Match Lid Colours
Choose the bottle colour and the lid colour separately to match your brand. Any combination costs the same, and you see it on the mock-up before anything is made.
In use
Built for outdoors and events
Powder-coated steel that takes knocks, insulation that keeps water cold all day, and a clip so it is never left behind. A good fit for outdoor brands, race packs and field teams.
Trust mark
Your logo on the body, ours on the base
The Just Bottle mark sits on the base with the lifetime warranty. Nothing of ours goes on the body, so the bottle is yours for custom branding.
Ocean plastic removal, included in every price
217670
plastic bottles removed from the ocean environment so far, verified by Plastic Bank
What your order adds
125 plastic bottles removedabout 2 kg of ocean-bound plastic, verified by Plastic Bank
5 bottles removed for every bottle you order. This quantity is also selected in the pricing table above.
A number you can report
Every order carries its own verified count, so your sustainability, ESG and procurement teams have a figure for the report rather than a vague claim. A Plastic Bank certificate is available on request.
A story on every desk
The Just Bottle trust mark underneath each product confirms the ocean plastic credentials and the lifetime warranty, so the impact travels with the bottle: to the gym, the client meeting, the kitchen at home.
Impact that pays people
Plastic Bank's collection communities in coastal regions are paid for the plastic they gather, so your order funds livelihoods as well as clean-up. The collection happens because of the order, not as an offset bought afterwards.
How the verification works
- Plastic Bank collectors gather ocean-bound plastic in coastal communities and it is weighed and logged at a collection point.
- The weight funded by your order is recorded against Just Bottle and converted at Plastic Bank's rate of 50 single-use 500 ml bottles per kilogram, from their Bottle2KG study across more than 100 collection branches.
- Your order's count is shown on your quote and invoice, and a certificate can be issued for your reporting.
Artwork
Send any logo file
A PNG, JPG, PDF or vector file of your logo is all we need. We send you a free mock-up within a day.
What happens next
- Send any logo file with your quote or enquiry.
- Free digital mock-up back within a day, with revisions until it is right.
- Approve the design. Nothing is due before that.
Planning a full 360° wrap? It prints as one seamless piece around the body, with no visible join. The printable band is 285 x 242 mm. Send your design at exactly that size, print ready, and it goes straight onto the mock-up.
About
The extra-large carabiner bottle for sports teams and long shifts. At 1.2 litres (40 oz) the XL Clipper is the biggest bottle we make: a whole day's water, clipped to a kit bag or a pack, in insulated stainless steel with the largest branding area in the range.
Why the 1.2 L
For a squad on a touchline or a crew on site, refilling is the enemy. Double-wall vacuum insulation keeps 1.2 litres cold for up to 24 hours, the wide mouth takes a lot of ice, and the secondary cap keeps sipping easy. Leakproof, BPA-free, with bottle and lid colours chosen separately.
Where it works
Sports teams and academies, gyms, trades and construction, outdoor and festival crews, and heat-exposed workplaces running hydration programmes.
Branding
Laser engraving, ColourLift™ raised print or 360° wrap. Just Bottle trust mark on the underside only. Free mock-up within a day.
Specifications
- Capacity: 1.2 L (40 oz)
- Material: food-grade 304 stainless steel, double-wall vacuum insulated, BPA-free
- Cold for up to 24 hours, hot for up to 12
- Carabiner clip lid with wide mouth and secondary drinking cap, leakproof
- 22 stock colours, lid colours to match, custom Pantone colour available
- Branding: laser engraving, ColourLift™ print or 360° wrap
Every 100 bottles ordered funds the collection of 10 kg of ocean-bound plastic through Plastic Bank, roughly 500 plastic bottles kept out of the sea, verified by our collection partner. See the full range of carabiner water bottles with your logo, or browse all custom logo water bottles.
Questions
Frequently asked
What is the minimum order?
25 bottles, sold in multiples of 25. Every bottle in the order carries the same branding.
How is the price worked out?
All-in and delivered: the per-bottle figure includes your logo, delivery and customs duties where applicable, with no setup fees and nothing added later. The price per bottle comes down with quantity and with a longer delivery window, because we pass on the production line and logistics savings when you can wait.
How long does delivery take?
You choose: about 2 weeks express, about 5 weeks standard, or about 12 weeks on the flexible timeline which costs less because we schedule it into quieter production slots and consolidated deliveries.
How is my logo applied?
With laser engraving, ColourLift™ raised print for full colour, multi-colour print, a 360° wrap that runs around the whole body. Send your artwork and one of the team returns a free mock-up within a day, with revisions until it is right.
What size is the print area?
Up to 285 x 242 mm on the Clipper Bottles - 1.2L. Your logo can sit anywhere within that area, and the mock-up shows the exact placement and size before you approve anything.
What logo file do I need to send?
Any file is fine to start. A vector file (PDF, AI, EPS or SVG) gives the sharpest result, and a clean, high-resolution PNG or JPG works well for the mock-up. If your file is too low in quality to print well we let you know before anything is made. For engraving, single colour artwork works best.
Can I have it in my brand colour?
Yes. Choose from 22 stock colours at the normal minimum of 25, or match your Pantone exactly on orders of 1000 or more. Custom colour runs are quoted individually, and the mock-up shows the colour before you approve.
Where does the Just Bottle logo go?
On the underside only, with the sustainability information. The Just Bottle trust mark confirms the ocean plastic credentials behind the product and carries our Made to Last lifetime warranty. The body of the bottle is left entirely for your brand.
Can I see it before I order?
Yes. You receive a free digital mock-up of your logo on the Clipper Bottles - 1.2L within a day, and nothing is due until you have approved the design.
Which size should we choose?
Can it go in the dishwasher?
Can we get replacement lids or parts?
What does the Made to Last warranty cover?
The quality is exceptional and the design with our logo looks amazing. What we really love is that they’re eco-friendly. It feels good to hand out something that’s not just useful, but also supports our sustainability initiative.
Get your quote in seconds
Generate a formal quote on screen, request a pro-forma invoice for your finance team, or just ask us something.
- All-in delivered pricing: your logo, delivery and duties included
- Free digital mock-up within a day
- Nothing to pay until you approve the design
