Care guide

Clean. Care. Refresh. Reuse.

A Just Bottle product is made to be kept for years, which is the point of it. This guide covers how to clean each material, how to keep your branding looking new, when to replace a lid or gasket rather than the bottle, and how the Just Bottle Assurance works.

Clean. Care. Refresh. Reuse.

Clean

How to clean each material

Material RoutineAvoid
Insulated stainless steel Warm water and a drop of washing-up liquid daily; a bottle brush and a weekly soak with a teaspoon of bicarbonate of soda or a cleaning tablet. Rinse and dry upside down with the lid off.No bleach, no abrasive pads, and do not freeze or microwave.
Borosilicate glass Warm soapy water or a cleaning tablet. Glass does not hold odours, so a daily rinse is usually enough.Avoid sudden temperature shocks, such as boiling water into a cold bottle.
Porcelain (Origin, Diner) Dishwasher safe, including the kiln-fired branding, which is fired into the glaze.Commercial dishwashers are fine.
Recycled rPET Warm soapy water and a soft brush. Top rack of the dishwasher is fine for the body.Keep away from very hot liquids and direct heat.
Lids, gaskets and straws Dishwasher safe on the top rack, or warm soapy water. Remove the silicone gasket once a week and wash it separately.Dry fully before refitting to avoid trapped moisture.

For the common mistakes that shorten a bottle's life, and the fix for a gym bottle that smells, see the cleaning articles on our blog.

Keeping your branding in perfect condition

Care

Keeping your branding in perfect condition

  1. Hand wash the body

    Printed and engraved steel and glass should be hand washed. Engraving cannot wear, but a dishwasher's heat and detergent will dull a print over time.

  2. Lids are dishwasher safe

    Every lid, gasket and straw can go in the dishwasher. Only the branded body needs the sink.

  3. Porcelain is the exception

    Origin and Diner branding is kiln-fired into the glaze, so they go through commercial dishwashers without any effect on the logo.

Questions

Care, answered

Can I put my branded bottle in the dishwasher?

The lid, yes. Hand wash the body to keep your branding in perfect condition. Origin and Diner porcelain are the exception: they are fully dishwasher safe.

My bottle smells even after washing. What now?

Remove the gasket from the lid and wash it separately, then soak the bottle overnight with a cleaning tablet or a teaspoon of bicarbonate of soda. Our blog has a full five-minute reset for gym bottles.

How long should a bottle last?

The body, for many years. Lids and gaskets wear first and are designed to be replaced. If a part fails through a manufacturing fault at any point, the Just Bottle Assurance covers it.

What does the Just Bottle Assurance cover?

Manufacturing defects for the lifetime of the product, including materials, lid function and insulation performance. Normal wear, loss and damage from misuse are not covered. Email info@justbottle.co with your order number and a photo.

Where do I find a replacement lid for my model?

In the lids and accessories collection, listed by bottle. If you are not sure which fits, send us a photo and we will point you to the right one.